Small dents in the prop could cause your engine to burn extra fuel. Also, check the propeller for any damage. Wipe down the console and everything else in the side of the boat.Ĭheck the propeller:If you have an outboard or a stern drive boat, as part of your pre-launch routine, you should check the propeller nut to ensure it is still tightened, by using a deep socket wrench.You’d be surprised at how easy dirt and crumbs can build up under this type of flooring. If you have a marine-grade, snap-on carpet, then remove it, bang it off away from the boat, and vacuum the flooring under it.Vacuum floors and in between tight spots.Storage compartments should be emptied and scrubbed down with a biodegradable solution such as Star Brite Sea Safe Biodegradable Boat Wash Soap.Check to make sure the outboard motor is still secure to the transom by tightening the bolts.Ĭlean the interior of the boat: The interior of the ship can accumulate dirt, mold, and mildew very quickly.Look for corrosion on fuel lines and clamps.Lubricate all moving parts with an anti-corrosive.If you notice a hose beginning to crack, you should replace it right away. Check the hoses and make sure they are not starting to crack.Here are some things you should keep an eye out for: Look over the engine:Now and then take a good look at the engine and make sure everything is looking good. Take a soft dry cloth and wipe the seat down rubbing in the protector.Spray on the UV protector product, after you’ve correctly cleaned your seats.I wrote an article on seat care and repair here. Not only does the product work great in protecting the seats, but it doesn’t leave an oily feel behind. A recommended product for vinyl, Plexiglas, carbon fiber, rubber, plastics, and finished leather is the 303 Marine Aerospace Protectant. Use a soft dry cloth to wipe down and dry the seats.Īt least once a week you should apply a UV inhibitor product to your seats to prevent them from shading or to crack, caused by harmful UV rays. Have a separate bucket of fresh water, use this to dampen a cloth and wipe away soap residue in a circular motion.Wet cloth or sponge, and wipe down seats in a circular motion.Fill bucket 3/4 full with fresh, clean water.Wipe down your boat seats:It is important to wipe down and clean your boat seats regularly to help prevent dirt, salt water, mold and mildew from damaging them over time. A dirty hull could add as much as 30% to your fuel costs. Regularly cleaning your boat will help prolong the boats finish and help protect the metals from corrosion, but it will also help you save money in fuel. Make sure that you are using an environmentally friendly soap such as biodegradable detergents, made specifically for boats, to protect the gel coat finish and the environment. You can use a long-handled brush, or a spray wand to make the job a lot easier. Wash your boat regularly: After every use, you should be washing your boat with clean, fresh water. I put together a list of items you should be checking and doing to help prolong the health of your boat and make each outing more enjoyable. Every boat requires some maintenance to ensure it’s running correctly and many of those things you can do yourself. Now that I’m a boat owner, I’m starting to learn that it’s not just all fun all of the time.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |